Pular para o conteúdo principal

Aviso: Você está editando um guia tipo pré-requisito. Quaisquer alterações que você faça afetarão todos os 14 guias que incluem este passo.

Inglês
Chinês
Passo 8
Carefully lift the logic board from the end closest to the speaker enclosure and slide it away from the top edge of the iPhone.
  • Carefully lift the logic board from the end closest to the speaker enclosure and slide it away from the top edge of the iPhone.

  • Remove the logic board.

  • Before reassembly, be sure to clean all metal-to-metal contact points on the logic board (not the mating halves of connectors) with a de-greaser such as windex or isopropyl alcohol. The oils on your fingers have the potential to cause grounding issues.

  • There is a small rubber bumper that sits on the top edge of the logic board where the digitizer and screen cables come through the case. It protects the cables as they bend over the top of the logic board. This can either get stuck to the cables or fall off the logic board when it comes out. Look back over step 22 for more details.

小心的从扬声器外壳端提起逻辑板,并将其从iPhone顶部边缘滑出。

移走逻辑板。

在重新组装之前,请务必使用脱气剂(如windex或异丙醇)来清楚逻辑板上的金属触点。(而不是线缆的连接器的两端)。以清楚粘在板上的手指油脂,来避免潜在的接地问题。

别忘了在22步所提到的小橡胶保险杠,它可以在电缆弯曲过度时保护线缆。 它有可能在您拆卸的过程中滑落下来,掉在逻辑板上。请回顾先前操作来让它处于正确位置。

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.