Ir para o conteúdo principal

Aviso: Você está editando um guia tipo pré-requisito. Quaisquer alterações que você faça afetarão todos os 14 guias que incluem este passo.

Inglês
Japonês

Traduzindo o passo 4

Passo 4
Use the edge of a plastic opening tool to pry the rear camera connector up from its socket on the logic board. Be careful not to break any components off the surrounding area on the logic board as you pry upwards.
  • Use the edge of a plastic opening tool to pry the rear camera connector up from its socket on the logic board.

  • Be careful not to break any components off the surrounding area on the logic board as you pry upwards.

  • Remove the rear camera from the iPhone.

  • There is a small rubber gasket that sits underneath the rear-facing camera. Make sure that it is properly seated before reassembly.

プラスチック製開封ツールの先端を使って、ロジックボード上のソケットから背面カメラコネクターを外します。

ソケットから引き上げる際、ロジックボードの周辺エリアに装着されている他のコンポーネントにダメージを与えないようご注意ください。

iPhoneから背面カメラを取り外します。

背面カメラの下に小サイズのゴム製ガスケットが取り付けられています。再組み立ての際はこのガスケットが正しい位置に取り付けられているかご確認ください。

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.