Ir para o conteúdo principal

Aviso: Você está editando um guia tipo pré-requisito. Quaisquer alterações que você faça afetarão todos os 14 guias que incluem este passo.

Inglês
Alemão

Traduzindo o passo 4

Passo 4
Use the edge of a plastic opening tool to pry the rear camera connector up from its socket on the logic board. Be careful not to break any components off the surrounding area on the logic board as you pry upwards.
  • Use the edge of a plastic opening tool to pry the rear camera connector up from its socket on the logic board.

  • Be careful not to break any components off the surrounding area on the logic board as you pry upwards.

  • Remove the rear camera from the iPhone.

  • There is a small rubber gasket that sits underneath the rear-facing camera. Make sure that it is properly seated before reassembly.

Heble den Stecker der Rückkamera mit der Kante eines Plastic Opening Tool aus seiner Fassung auf dem Logic Board.

Achte beim Hebeln darauf, dass du keine Komponenten auf dem umliegenden Bereich auf dem Logic Boards beschädigst.

Entferne die Rückkamera aus dem iPhone.

Unter der Rückkamera befindet sich eine kleine Gummidichtung. Stelle vor dem Wiederzusammenbau sicher, dass sie richtig eingesetzt ist.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.