Ir para o conteúdo principal
Inglês
Holandês
Passo 13
Insert the leads of the 390 Ω resistor through the holes indicated in step 7. This resistor will have an orange, grey, brown and gold band on it. The direction of the resistor does not matter.
  • Insert the leads of the 390 Ω resistor through the holes indicated in step 7. This resistor will have an orange, grey, brown and gold band on it. The direction of the resistor does not matter.

  • Be sure to route the leads so that they do not cover any of the indicated holes in steps 7 and 8.

  • Solder the resistor to the PCB and clip off the excess leads.

Insira tradução aqui

Insira tradução aqui

Insira tradução aqui

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.