Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Aviso: Você está editando um guia tipo pré-requisito. Quaisquer alterações que você faça afetarão todos os 2 guias que incluem este passo.

Inglês
Japonês
Passo 4
Peel up the last of the tape holding the home button ribbon cable in place by inserting an opening pick between the cable and the digitizer. Continue sliding the pick underneath the cable until it is wholly separated from the front panel
  • Peel up the last of the tape holding the home button ribbon cable in place by inserting an opening pick between the cable and the digitizer.

  • Continue sliding the pick underneath the cable until it is wholly separated from the front panel

  • Do not attempt to remove the home button yet. Is is still held in place by a strongly adhered bracket and delicate gasket.

ケーブルとデジタイザの間に開口ピックを挿入して、ホームボタンリボンケーブルを固定しているテープの最後の部分をはがします。

ケーブルの下にあるピックを、フロントパネルから完全に離れるまで引っぱり粘着シールを剥がし切ります

ホームボタンを、この時点では外さないでください。まだ強く粘着されているブラケットとガスケットによって固定されています。

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.