Ir para o conteúdo principal

Aviso: Você está editando um guia tipo pré-requisito. Quaisquer alterações que você faça afetarão todos os 7 guias que incluem este passo.

Inglês
Alemão
Passo 2
Pull the silver metal AC-In socket retainer away from the side of the outer case and remove it from the mini. During reassembly, notice that the silver clip hugs either side of the lower beveled edge of the AC connector. When sliding the clip back in it will hit a stop, but not click into place. You will know that you did it correctly because it will not easily move out of position. During reassembly, notice that the silver clip hugs either side of the lower beveled edge of the AC connector. When sliding the clip back in it will hit a stop, but not click into place. You will know that you did it correctly because it will not easily move out of position.
  • Pull the silver metal AC-In socket retainer away from the side of the outer case and remove it from the mini.

  • During reassembly, notice that the silver clip hugs either side of the lower beveled edge of the AC connector. When sliding the clip back in it will hit a stop, but not click into place. You will know that you did it correctly because it will not easily move out of position.

Ziehe die silbermetallische Halteklammer des Netzanschlusssockels von der Seite des Gehäuses weg und entferne sie vom Mini.

Achte beim Zusammenbau darauf, dass dieser Halter beide Seiten der abgeschrägten Kante des Netzanschlusses umfasst. Wenn du ihn einschiebts wirst du einen Widerstand spüren, aber kein Klick. Daran merkst du, dass er richtig sitzt, er lässt sich dann nur schwer bewegen.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.