Ir para o conteúdo principal
Inglês
Alemão
Passo 9
To secure your new drive in your iMac, you will need to place high strength double-sided tape at the four corners on the side of the drive with the SATA connectors. Peel the backing off one side of the double-sided tape and place the pieces at the four corners of the hard drive. Peel the backing off one side of the double-sided tape and place the pieces at the four corners of the hard drive.
  • To secure your new drive in your iMac, you will need to place high strength double-sided tape at the four corners on the side of the drive with the SATA connectors.

  • Peel the backing off one side of the double-sided tape and place the pieces at the four corners of the hard drive.

Das neue Laufwerk wird mit vier sehr kräftigen Stücken doppelseitigen Klebebands an den vier Ecken auf der Seite mit den SATA Anschlüssen befestigt.

Löse die Schutzfolie von einer Seite des doppelseitigen Klebebands ab und klebe die Stücke in die vier Ecken des Laufwerks.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.