Ir para o conteúdo principal

Aviso: Você está editando um guia tipo pré-requisito. Quaisquer alterações que você faça afetarão todos os 63 guias que incluem este passo.

Inglês
Japonês

Traduzindo o passo 2

Passo 2
Continuing to support the display with one hand, flip up the metal retaining bracket on the display data cable. Carefully pull the display data cable from its socket on the logic board. Be sure to pull the display data cable connector straight out of its socket, keeping it parallel to the motherboard, to avoid damaging it.
  • Continuing to support the display with one hand, flip up the metal retaining bracket on the display data cable.

  • Carefully pull the display data cable from its socket on the logic board.

  • Be sure to pull the display data cable connector straight out of its socket, keeping it parallel to the motherboard, to avoid damaging it.

引き続きディスプレイを片手で固定しながら、ディスプレイデータケーブル上にあるメタル製固定ブラケットを裏返します。

ロジックボード上のソケットから、ディスプレイデータケーブルをゆっくりと引っ張ります。

ディスプレイデータケーブルのコネクタを、ソケットからまっすぐ引っ張ります。その際、マザーボードにダメージを与えないよう気をつけながら、ケーブルをマザーボードと並行にして引き抜いてください。

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.