Skip to main content

Aviso: Você está editando um guia tipo pré-requisito. Quaisquer alterações que você faça afetarão todos os 23 guias que incluem este passo.

Inglês
Japonês

Traduzindo o passo 2

Step 2
Lift the bottom edge of the lower case off the rest of the 3DS. There are still two ribbon cables connecting the mother board to the case, so be sure not to pull the lower case all the way off. Use a plastic opening tool to pry the shoulder button ribbon cables off their sockets on the motherboard.
  • Lift the bottom edge of the lower case off the rest of the 3DS.

  • There are still two ribbon cables connecting the mother board to the case, so be sure not to pull the lower case all the way off.

  • Use a plastic opening tool to pry the shoulder button ribbon cables off their sockets on the motherboard.

  • Remove the lower case from the device.

3DSの他の部分から底部ケースの下端を持ち上げて外します。

2本のリボンケーブルがまだマザーボードをケースに接続しているので、底部ケースを完全に引き離さないようにしてください。

プラスチック製開口ツールを使い、マザーボード上のソケットからショルダーボタンのリボンケーブルを取り外します。

デバイスから底部ケースを取り外します。

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.