Skip to main content

Aviso: Você está editando um guia tipo pré-requisito. Quaisquer alterações que você faça afetarão todos os 23 guias que incluem este passo.

Inglês
Alemão

Traduzindo o passo 2

Step 2
Lift the bottom edge of the lower case off the rest of the 3DS. There are still two ribbon cables connecting the mother board to the case, so be sure not to pull the lower case all the way off. Use a plastic opening tool to pry the shoulder button ribbon cables off their sockets on the motherboard.
  • Lift the bottom edge of the lower case off the rest of the 3DS.

  • There are still two ribbon cables connecting the mother board to the case, so be sure not to pull the lower case all the way off.

  • Use a plastic opening tool to pry the shoulder button ribbon cables off their sockets on the motherboard.

  • Remove the lower case from the device.

Hebe die Unterkante des Gehäuseunterteils vom restlichen 3DS weg.

Die Hauptplatine ist immer noch mit zwei Flachbandkabeln mit dem Gehäuse verbunden, ziehe deswegen das untere Gehäuse nicht ganz heraus.

Löse die Flachbandkabel der Seitentasten mit einem Plastiköffnungswerkzeug aus ihren Anschlüssen auf der Hauptplatine.

Entferne das Gehäuseunterteil vom Gerät.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.