Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Aviso: Você está editando um guia tipo pré-requisito. Quaisquer alterações que você faça afetarão todos os 28 guias que incluem este passo.

Inglês
Alemão

Traduzindo o passo 2

Passo 2
The front panel ribbon cables are connected beneath the LCD. To access them, you'll need to temporarily flip the LCD over and out of the way. Be very careful when moving the LCD, and do not attempt to remove it from the iPad—its display data cable will remain connected while it is rotated over.
  • The front panel ribbon cables are connected beneath the LCD. To access them, you'll need to temporarily flip the LCD over and out of the way.

  • Be very careful when moving the LCD, and do not attempt to remove it from the iPad—its display data cable will remain connected while it is rotated over.

  • Lift the LCD from its long edge closest to the volume buttons and gently flip it out of the rear case—like turning the page in a book.

  • Set the LCD face down on the front panel.

Die Front Panel Flachbandkabel sind unterhalb des LCD festgemacht. Um sie zugänglich zu machen, musst du kurzzeitig das LCD aus dem Weg klappen.

Sei dabei sehr vorsichtig mit dem LCD und versuche nicht, es vom iPad zu entfernen—das Displaydatenkabel bleibt angeschlossen, während das Display umgeklappt wird.

Hebe das LCD an der langen Kante auf der Lautsprecherreglerseite an und klappe es vorsichtig aus dem hinteren Gehäuse heraus —so als ob du eine Buchseite umblätterst.

Lege das LCD umgekehrt auf das Front Panel.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.