Skip to main content

Aviso: Você está editando um guia tipo pré-requisito. Quaisquer alterações que você faça afetarão todos os 39 guias que incluem este passo.

Inglês
Alemão

Traduzindo o passo 1

Step 1
Use the edge of a plastic opening tool to carefully flip up the retaining flaps on the two digitizer ribbon cable ZIF sockets. Be sure you are prying up on the hinged retaining flaps, not the sockets themselves.
  • Use the edge of a plastic opening tool to carefully flip up the retaining flaps on the two digitizer ribbon cable ZIF sockets.

  • Be sure you are prying up on the hinged retaining flaps, not the sockets themselves.

  • The retaining flaps are highlighted in red in the second picture.

Klappe die Haltebügel an den beiden ZIF-Sockeln der Digitizer Flachbandkabel vorsichtig mit einem Plastic Opening Tool um.

Achte darauf, dass du an den klappbaren Haltebügeln hebelst und nicht an den Sockeln selbst.

Die Haltebügel sind rot im zweiten Bild hervorgehoben.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.