Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Aviso: Você está editando um guia tipo pré-requisito. Quaisquer alterações que você faça afetarão o guia que inclui este passo.

Inglês
Japonês

Traduzindo o passo 6

Passo 6
Push the red stopper of the headphone jack connection through the plastic tunnel with the spudger. Use care to guide the head phone jack connection through the plastic tunnel, as it may deform and break if forceful or sudden movements is used. The headphone jack is made of a very thin plastic. While holding the back end of the headphone jack connection, grasp the headphone jack connection with the pair of tweezers and guide it through the plastic tunnel.
  • Push the red stopper of the headphone jack connection through the plastic tunnel with the spudger.

  • Use care to guide the head phone jack connection through the plastic tunnel, as it may deform and break if forceful or sudden movements is used. The headphone jack is made of a very thin plastic.

  • While holding the back end of the headphone jack connection, grasp the headphone jack connection with the pair of tweezers and guide it through the plastic tunnel.

  • Remove the headphone jack connection from the device.

ヘッドホンジャック接続部分の赤いストッパーをスパッジャーでプラスチックトンネルに押し込みます。

ヘッドホンジャックの接続は、力強い動きや突然の衝撃があると変形したり破損する可能性があります。そのため、プラスチックトンネルを通して解放してください。 ヘッドフォンジャックは非常に薄いプラスチック製です。

ヘッドホンジャック接続の後端を持ちながら、ピンセットでヘッドホンジャック接続をつかみ、プラスチックトンネルに通します。

デバイスからヘッドフォンジャックの接続部分を取り出します。

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.