Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Aviso: Você está editando um guia tipo pré-requisito. Quaisquer alterações que você faça afetarão todos os 23 guias que incluem este passo.

Inglês
Chinês

Traduzindo o passo 1

Passo 1
Remove two Phillips screws securing the battery connector bracket to the logic board, of the following lengths:
  • Remove two Phillips screws securing the battery connector bracket to the logic board, of the following lengths:

  • One 2.9 mm screw

  • One 2.3 mm screw

  • Throughout this guide, keep careful track of your screws so that each one goes back where it came from during reassembly. Installing a screw in the wrong place can cause permanent damage.

卸下电池排线固定架上的2颗Phillips #00 螺丝。

1颗2.9 mm螺丝

1颗2.3 mm螺丝

[* black] Remove the following Phillipstwo Phillips screws securing the battery connector bracket to the logic boardboard, of the following lengths:
[* black] Remove the following Phillipstwo Phillips screws securing the battery connector bracket to the logic boardboard, of the following lengths:
[* red] One 2.9 mm screw
[* orange] One 2.3 mm screw
[* icon_reminder] Throughout this guide, [product|IF145-167-4|keep careful track of your screws|new_window=true] so that each one goes back where it came from during reassembly. Installing a screw in the wrong place can cause permanent damage.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.