Ir para o conteúdo principal

Aviso: Você está editando um guia tipo pré-requisito. Quaisquer alterações que você faça afetarão todos os 8 guias que incluem este passo.

Inglês
Japonês
Step 18
Tip the logic board up to a vertical position to expose the single antenna connector on the underside, near the top edge of the board. Do not attempt to fully remove the logic board yet, as the Wi-Fi/Bluetooth antenna is still connected to the underside of the board. Do not attempt to fully remove the logic board yet, as the Wi-Fi/Bluetooth antenna is still connected to the underside of the board.
  • Tip the logic board up to a vertical position to expose the single antenna connector on the underside, near the top edge of the board.

  • Do not attempt to fully remove the logic board yet, as the Wi-Fi/Bluetooth antenna is still connected to the underside of the board.

ボードの上部端あたりの下側にシングルのアンテナコネクターが確認できるように、ロジックボードを垂直に開きます。

まだロジックボードを完全に取り外さないでください。Wi-Fi/Bluetoothアンテナは、ボードの下でまだ繋がっています。

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.