Ir para o conteúdo principal

Aviso: Você está editando um guia tipo pré-requisito. Quaisquer alterações que você faça afetarão todos os 8 guias que incluem este passo.

Inglês
Alemão
Step 18
Tip the logic board up to a vertical position to expose the single antenna connector on the underside, near the top edge of the board. Do not attempt to fully remove the logic board yet, as the Wi-Fi/Bluetooth antenna is still connected to the underside of the board. Do not attempt to fully remove the logic board yet, as the Wi-Fi/Bluetooth antenna is still connected to the underside of the board.
  • Tip the logic board up to a vertical position to expose the single antenna connector on the underside, near the top edge of the board.

  • Do not attempt to fully remove the logic board yet, as the Wi-Fi/Bluetooth antenna is still connected to the underside of the board.

Kippe das Logic Board nach oben, bis es senkrecht steht, damit du an den einzelnen Antennenanschluss auf der Unterseite herankommst, der sich in der Nähe der oberen Kante des Boards befindet.

Versuche nicht, das Logic Board jetzt schon ganz zu entfernen, da die Wlan-Antenne noch mit der Unterseite des Boards verbunden ist.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.