Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Peças e ferramentas

Aviso: Você está editando um guia tipo pré-requisito. Quaisquer alterações que você faça afetarão todos os 11 guias que incluem este passo.

Inglês
Alemão

Traduzindo o passo 5

Passo 5
Use the edge of a plastic opening tool to pry the cellular antenna cable up from its socket on the logic board. De-route the cellular antenna cable out from under the metal fingers attached to the logic board.
  • Use the edge of a plastic opening tool to pry the cellular antenna cable up from its socket on the logic board.

  • De-route the cellular antenna cable out from under the metal fingers attached to the logic board.

  • When reconnecting the antenna wire be VERY certain that the round connector at the end of the wire is centered on its mating half on the motherboard before applying pressure. Failure to do so will likely destroy both halves of the connector.

Benutze die Kante eines Plastiköffnungswerkzeugs, um das Kabel der Mobilfunkantenne aus seinem Anschluss auf dem Logic Board zu hebeln.

Löse das Kabel der Mobilfunkantenne unter den Metallstiften, die am Logic Board befestigt sind, heraus.

Beim Wiederverbunden des Antennenkabel mußt du SEHR sicher sein, dass der runde Stecker am Ende des Kabels genau auf seine passende Hälfte auf dem Motherboard passt bevor du darauf drückst. Wenn du das nicht tust, werden beide Hälften des Steckers sehr wahrscheinlich zerstört.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.