Ir para o conteúdo principal
Inglês
Japonês
Passo 2
Remove (4) 2.9mm screws from the L-shaped circuit board. They are marked with red circles in the slide. Remove the (3) wire strips connected to the camera so you can pull off the L-shaped circuit board. Remove the single wire strip that is connected to the bottom of the circuit board.
  • Remove (4) 2.9mm screws from the L-shaped circuit board. They are marked with red circles in the slide.

  • Remove the (3) wire strips connected to the camera so you can pull off the L-shaped circuit board.

  • Remove the single wire strip that is connected to the bottom of the circuit board.

Insira tradução aqui

Insira tradução aqui

Insira tradução aqui

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.