Ir para o conteúdo principal

Aviso: Você está editando um guia tipo pré-requisito. Quaisquer alterações que você faça afetarão o guia que inclui este passo.

Inglês
Japonês

Traduzindo o passo 1

Passo 1
Examine your replacement part, and your original display carefully to be sure they match. Your replacement screen may be missing the sleep/wake sensor that is necessary for Smart Cover use. If you want to maintain functionality you will need to transfer the component. Desolder the four solder pads from the lower left of the display to remove the sensor assembly cable.
  • Examine your replacement part, and your original display carefully to be sure they match.

  • Your replacement screen may be missing the sleep/wake sensor that is necessary for Smart Cover use. If you want to maintain functionality you will need to transfer the component.

  • Desolder the four solder pads from the lower left of the display to remove the sensor assembly cable.

  • The following step includes instructions for transferring this sensor to the new display assembly.

交換用パーツと元のディスプレイを注意深く確認してください。

交換用のスクリーンに、Smart Coverの使用に必要なスリープセンサーがない場合があります。 必要に応じて、Smart Cover用スリープセンサーを移植する必要があります。

センサーアセンブリケーブルを取り外すには、ディスプレイの左下から4つのはんだパッドを露出させます。

次の手順は、このセンサーを新しいディスプレイアセンブリに移植するため方法です。

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.