Ir para o conteúdo principal

Aviso: Você está editando um guia tipo pré-requisito. Quaisquer alterações que você faça afetarão todos os 17 guias que incluem este passo.

Inglês
Japonês
Passo 26
To reduce the risk of a short, you can use a battery isolation pick to disconnect the battery. The battery isolation pick or battery blocker is an outdated way of isolating the battery, as you risk damaging the battery pins underneath the logic board. If you use this method, take extreme care to insert it gently and straight in the direction of the logic board. Do not twist or swing the pick side to side.
  • To reduce the risk of a short, you can use a battery isolation pick to disconnect the battery.

  • The battery isolation pick or battery blocker is an outdated way of isolating the battery, as you risk damaging the battery pins underneath the logic board. If you use this method, take extreme care to insert it gently and straight in the direction of the logic board. Do not twist or swing the pick side to side.

  • Slide a battery isolation pick underneath the battery connector area of the logic board, and leave it in place while you work.

ショートする危険性を減らすために、バッテリー用絶縁ピックを使用してバッテリーの接続を切って下さい。

バッテリーの絶縁ピックもしくはバッテリーブロッカーの使用は、バッテリーを絶縁させるための古いやり方となりつつあります。ロジックボードの下にあるバッテリーピンにダメージを与えてしまうリスクがあるためです。この方法をとる場合は、ロジックボードの方向に慎重にまっすぐ差し込んでください。コネクタの端から端をスイングしたりひねったりしないでください。

メイン基板のバッテリーコネクターエリアの下に、バッテリー絶縁ピックをスライドさせ、作業中はそのままにしておきます。

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.