Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Aviso: Você está editando um guia tipo pré-requisito. Quaisquer alterações que você faça afetarão todos os 17 guias que incluem este passo.

Inglês
Francês
Passo 6
Slide the pick along the edge of the display, towards the headphone jack. If there is still a considerable amount of resistance when sliding the opening pick, repeat the iOpener heating procedure and apply additional heat. Be careful not to let the opening pick slide between the fused LCD and front panel, as doing so can permanently damage the display.
  • Slide the pick along the edge of the display, towards the headphone jack.

  • If there is still a considerable amount of resistance when sliding the opening pick, repeat the iOpener heating procedure and apply additional heat.

  • Be careful not to let the opening pick slide between the fused LCD and front panel, as doing so can permanently damage the display.

  • A good rule of thumb is to never insert the opening pick more than a quarter inch (6 mm) into the iPad.

Faites glisser le médiator en plastique le long du bord de l'écran, vers la prise casque.

Si le médiator rencontre encore beaucoup de résistance, répétez la procédure de chauffage avec l'iOpener et et chauffez plus.

Veillez à ne pas faire glisser le médiator entre l'écran LCD et le panneau frontal fusionnés, cela pourrait endommager définitivement l'écran.

En règle générale, n'insérez jamais le médiator sur plus de 6 mm dans l'iPad.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.