Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Peças e ferramentas

Aviso: Você está editando um guia tipo pré-requisito. Quaisquer alterações que você faça afetarão todos os 25 guias que incluem este passo.

Inglês
Chinês

Traduzindo o passo 6

Passo 6
To install new rear glass: Use tweezers to peel away any remaining adhesive from the phone's chassis.
  • To install new rear glass:

  • Use tweezers to peel away any remaining adhesive from the phone's chassis.

  • Clean the adhesion areas with high concentration isopropyl alcohol (at least 90%) and a lint-free cloth. Swipe in one direction only, not back and forth. This will help prep the surface for the new adhesive.

  • Peel the adhesive backing off of the new rear glass, carefully line up one edge of the glass against the phone chassis, and firmly press the glass onto the phone.

  • If you're reinstalling the old rear glass, or using rear glass without adhesive pre-installed, follow this guide.

此时,后部玻璃面板应该完全从手机上分开。双面胶可能仍然会粘附在两侧上。

拉开后部面板,然后完全分离它们。

参考此指南以重新安装后部玻璃面板。

[* icon_note] At this point, theicon_reminder] To install new rear glass panel should be fully separatedglass:
[* black] Use tweezers to peel away any remaining adhesive
from the body ofphone's chassis.
[* black] Clean
the phone, althoughadhesion areas with high concentration isopropyl alcohol (at least 90%) and a lint-free cloth. Swipe in one direction only, not back and forth. This will help prep the adhesive strip may be attached to both sides.
[*
surface for the new adhesive.
[*
black] PullPeel the adhesive backing off of the new rear panelglass, carefully line up one edge of the glass against the phone chassis, and away to completely separate itfirmly press the glass onto the phone.
[* icon_reminder] Follow [guide|47490|this guide] to reinstallIf you're reinstalling the old rear glassglass, or using rear glass without adhesive pre-installed, follow [guide|47490|this guide|new_window=true].
[* icon_note] At this point, theicon_reminder] To install new rear glass panel should be fully separatedglass:
[* black] Use tweezers to peel away any remaining adhesive
from the body ofphone's chassis.
[* black] Clean
the phone, althoughadhesion areas with high concentration isopropyl alcohol (at least 90%) and a lint-free cloth. Swipe in one direction only, not back and forth. This will help prep the adhesive strip may be attached to both sides.
[*
surface for the new adhesive.
[*
black] PullPeel the adhesive backing off of the new rear panelglass, carefully line up one edge of the glass against the phone chassis, and away to completely separate itfirmly press the glass onto the phone.
[* icon_reminder] Follow [guide|47490|this guide] to reinstallIf you're reinstalling the old rear glassglass, or using rear glass without adhesive pre-installed, follow [guide|47490|this guide|new_window=true].

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.