Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Peças e ferramentas

Aviso: Você está editando um guia tipo pré-requisito. Quaisquer alterações que você faça afetarão todos os 8 guias que incluem este passo.

Inglês
Alemão
Passo 12
Removing the battery before lifting out the logic board is not strictly required, but makes removing the logic board easier and safer. If you leave your battery in, be especially careful not to bend the logic board against the battery's case near its bar code. Remove the following Tri-point screws securing the battery to the upper case:
  • Removing the battery before lifting out the logic board is not strictly required, but makes removing the logic board easier and safer. If you leave your battery in, be especially careful not to bend the logic board against the battery's case near its bar code.

  • Remove the following Tri-point screws securing the battery to the upper case:

  • One 5.5 mm Tri-point screw

  • One 13.5 mm Tri-point screw

  • Lift the battery out of the upper case.

Es ist nicht zwingend nötig den Akku zu entfernen, bevor du das Logic Board heraushebst. Es ist aber sicherer und einfacher. Wenn du den Akku drinnen lässt, achte sehr darauf, dass du das Logic Board nicht am Akku in der Nähe des Strichcodes verbiegst.

Entferne folgende TriPoint Schrauben, die den Akku am oberen Gehäuse befestigen:

Eine 5,5 mm TriPoint Schraube

Eine 13,5 mm TriPoint Schraube

Hebe den Akku aus dem Gehäuse.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.