Ir para o conteúdo principal

Aviso: Você está editando um guia tipo pré-requisito. Quaisquer alterações que você faça afetarão o guia que inclui este passo.

Inglês
Chinês
Passo 8
If your replacement battery came with pre-installed adhesive, peel off the protective tab now, exposing the adhesive. Rotate the battery down into its slot, and press it into position. Press the battery down against the S1 to re-adhere it in place.
  • If your replacement battery came with pre-installed adhesive, peel off the protective tab now, exposing the adhesive.

  • Rotate the battery down into its slot, and press it into position.

  • Press the battery down against the S1 to re-adhere it in place.

  • Now is the best time to test powering on your watch—if it doesn't turn on, double check all three connectors and try again.

如果你的备用电池带有预装的粘合剂,请立即撕下保护拉条,露出粘合剂。

将电池向下旋转到其插槽中,然后将其按入到位。

向下按电池使其紧贴S1。

现在就是手表开机的最佳时机,如果不能开机。那请再次检查那三个排线、

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.