Ir para o conteúdo principal

Aviso: Você está editando um guia tipo pré-requisito. Quaisquer alterações que você faça afetarão o guia que inclui este passo.

Inglês
Japonês
Passo 8
If your replacement battery came with pre-installed adhesive, peel off the protective tab now, exposing the adhesive. Rotate the battery down into its slot, and press it into position. Press the battery down against the S1 to re-adhere it in place.
  • If your replacement battery came with pre-installed adhesive, peel off the protective tab now, exposing the adhesive.

  • Rotate the battery down into its slot, and press it into position.

  • Press the battery down against the S1 to re-adhere it in place.

  • Now is the best time to test powering on your watch—if it doesn't turn on, double check all three connectors and try again.

バッテリーを回転させてスロットに入れ、所定の位置に押し込みます。

バッテリーをS1上に押し付けて、接着剤で再装着します。

これで、Watchの電源テストするベストなタイミングです。電源が入らない場合は、3つのコネクタをすべて再点検してから、再試行してください。

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.