Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Inglês
Japonês
Passo 4
Set the motherboard on a support so that the CPU and GPU are completely supported and level. The support should be something that can resist temperatures upwards of 300 degrees Celsius. Suggestions: scrap lumber, old books, cardboard box.
  • Set the motherboard on a support so that the CPU and GPU are completely supported and level.

  • The support should be something that can resist temperatures upwards of 300 degrees Celsius. Suggestions: scrap lumber, old books, cardboard box.

  • In the next few steps, you will be reflowing the solder under the chips marked in red.

  • Once you begin reflowing the chips, do not touch or move the motherboard until it is completely cool. Doing so can render the motherboard irreparably damaged.

CPUとGPUがしっかりと水平に安定するように、マザーボードを作業台の上に置きます。

作業台は300℃まで耐えられるものを使用してください。不要な木材、古い本、段ボール箱などがおすすめです。

次の手順では、赤線で囲まれたチップの下にあるはんだをリフローします。

チップのリフローを開始したら、冷却が完了するまでマザーボードに触れたり動かしたりしないでください。このような動作を行うと、マザーボードに修復不能な損傷が発生するおそれがあります。

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.