Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Inglês
Espanhol
Passo 4
Set the motherboard on a support so that the CPU and GPU are completely supported and level. The support should be something that can resist temperatures upwards of 300 degrees Celsius. Suggestions: scrap lumber, old books, cardboard box.
  • Set the motherboard on a support so that the CPU and GPU are completely supported and level.

  • The support should be something that can resist temperatures upwards of 300 degrees Celsius. Suggestions: scrap lumber, old books, cardboard box.

  • In the next few steps, you will be reflowing the solder under the chips marked in red.

  • Once you begin reflowing the chips, do not touch or move the motherboard until it is completely cool. Doing so can render the motherboard irreparably damaged.

Pon la placa base en un soporte para que la CPU y la GPU estén completamente estables y niveladas.

El soporte debe ser algo que pueda resistir temperaturas superiores a 300 grados centígrados. Sugerencias: madera de desecho, libros viejos, caja de cartón.

En los próximos pasos, volverá a fluir la soldadura debajo de los chips marcados en rojo.

Una vez que comience a refluir los chips, no toques ni muevas la placa base hasta que esté completamente fría. Si lo haces, la placa base puede sufrir daños irreparables.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.