Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Inglês
Japonês
Passo 3
Set the heat gun to "Low", and let it run for a few seconds to reach operating temperature.
  • Set the heat gun to "Low", and let it run for a few seconds to reach operating temperature.

  • Holding the motherboard upright, warm up the entire board with the heat gun. The board should be warm, but not too hot.

  • This will prevent damage to the board caused by localized thermal expansion.

ヒートガンを「低」にセットして、作業温度に到達するまで数秒間当て続けます。

マザーボードを直立させた状態で保持し、ボード全体をヒートガンで加熱します。ボードを加熱しすぎないようにしてください。

これにより、局所的な熱膨張によるボードの損傷を防止できます。

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.