Skip to main content
Inglês
Japonês
Step 11
Once we got inside, our trusty Phillips drivers started to mysteriously let us down—these screws seemed to be in between two sizes. Surprise, they're JIS! Now, where do we get ahold of a JIS bit... With our driver properly equipped, the motherboard comes flying out without delay...
  • Once we got inside, our trusty Phillips drivers started to mysteriously let us down—these screws seemed to be in between two sizes.

  • Surprise, they're JIS! Now, where do we get ahold of a JIS bit...

  • With our driver properly equipped, the motherboard comes flying out without delay...

  • ...or not? There's not one, but two cables attached to the rear of the motherboard, just to make things tricky.

  • Boy, reassembly's gonna be fun.

一度内部に入ると、いつも期待に応えてくれるプラスネジドライバーのはずが、なぜか私たちを失望させ始めました。 ここに留められたネジが2つのサイズのちょうど中間のようです。

サプライズ、これはJIS規格のネジです! さて、私たちはどこでJIS規格のビットを準備できるでしょうか…

ドライバーを正しく装備できれば、マザーボードは計画通り取り出せます...

...のはずですが?マザーボードの背面になんと2本のケーブルが接続されています。そのため作業には少し手こずります。

まったく、これで再組み立ては楽しいものになるはずです。しょうがないです。

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.