Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Peças e ferramentas

Aviso: Você está editando um guia tipo pré-requisito. Quaisquer alterações que você faça afetarão o guia que inclui este passo.

Inglês
Alemão
Passo 45
Carefully insert the flat end of a spudger between the rear-facing camera and the top of the logic board. Pry the logic board up enough to grab it with your fingers.
  • Carefully insert the flat end of a spudger between the rear-facing camera and the top of the logic board.

  • Pry the logic board up enough to grab it with your fingers.

  • Be extremely careful not to damage the rear-facing camera cable, or any logic board components.

  • If the logic board does not lift easily, there may still be adhesive holding it to the rear case. Try sliding the pick farther before prying again.

Setze vorsichtig das flache Ende eines Spudgers zwischen der Rückkamera und der Oberkante des Logic Boards ein.

Hebe das Logic Board so weit an, dass du es mit den Fingern fassen kannst.

Sei äußerst vorsichtig und beschädige weder das Kabel der Rückkamera noch Bauteile auf dem Logic Board.

Wenn sich das Logic Board noch nicht leicht anheben lässt, dann klebt es vielleicht immer noch etwas am Rückgehäuse fest. Versuche das Plektrum noch weiter einzuschieben, bevor du erneut hebelst.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.