Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Peças e ferramentas

Aviso: Você está editando um guia tipo pré-requisito. Quaisquer alterações que você faça afetarão o guia que inclui este passo.

Inglês
Francês
Passo 42
Reinsert the opening pick under the Lightning connector ribbon cable from the case-side edge. Slide the pick along the Lightning connector ribbon cable and under the logic board. Move slowly and carefully. If the opening pick does not slide easily, apply more heat and try again. If you use excessive force, you will likely slip and sever the Lightning connector cable.
  • Reinsert the opening pick under the Lightning connector ribbon cable from the case-side edge.

  • Slide the pick along the Lightning connector ribbon cable and under the logic board.

  • Move slowly and carefully. If the opening pick does not slide easily, apply more heat and try again. If you use excessive force, you will likely slip and sever the Lightning connector cable.

  • Leave the pick under the Lightning connector cable to keep the adhesive separated.

Réinsérez le médiator sous la nappe du connecteur de charge Lightning du côté de la coque.

Faites glisser le médiator le long de la nappe du connecteur de charge Lightning et sous la carte mère.

Déplacez-le lentement et soigneusement. Si le médiator ne glisse pas facilement, chauffez plus et réessayez. Si vous forcez trop, vous risquez de déraper et de couper la nappe du connecteur de charge Lightning.

Laissez le médiator sous la nappe du connecteur de charge Lightning pour empêcher l'adhésif d'adhérer à nouveau.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.