Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Peças e ferramentas

Aviso: Você está editando um guia tipo pré-requisito. Quaisquer alterações que você faça afetarão o guia que inclui este passo.

Inglês
Francês
Passo 27
Throughout the following procedure, you'll be sliding thin plastic cards between the battery and rear case of the iPad to separate the adhesive securing the battery in place. Be careful to keep the cards as flat as possible to avoid bending the battery, which may damage it and cause it to release dangerous chemicals. Insert a plastic card under the battery from the Lightning cable connector end of the iPad.
  • Throughout the following procedure, you'll be sliding thin plastic cards between the battery and rear case of the iPad to separate the adhesive securing the battery in place. Be careful to keep the cards as flat as possible to avoid bending the battery, which may damage it and cause it to release dangerous chemicals.

  • Insert a plastic card under the battery from the Lightning cable connector end of the iPad.

  • If you encounter significant resistance, re-heat the iOpener and repeat the previous step to give the adhesive more time to soften.

Tout au long de la procédure suivante, vous glisserez des cartes plastiques entre la batterie et la coque arrière de l'iPad pour décoller l'adhésif fixant la batterie. Veillez à garder les cartes aussi plates que possible pour éviter de plier la batterie, ce qui pourrait l'endommager et laisser s'échapper des produits chimiques dangereux.

Insérez une carte en plastique sous la batterie du côté du connecteur de charge Lightning.

Si vous rencontrez une résistance significative, réchauffez l'iOpener et répétez l'étape précédente pour que l'adhésif ramollisse plus longtemps.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.