Ir para o conteúdo principal

Aviso: Você está editando um guia tipo pré-requisito. Quaisquer alterações que você faça afetarão todos os 9 guias que incluem este passo.

Inglês
Japonês
Passo 6
Use a heat gun to soften the adhesive under the black strip near the upper left corner of the glass display panel. Attach a suction cup near the upper left corner of the glass display panel.
  • Use a heat gun to soften the adhesive under the black strip near the upper left corner of the glass display panel.

  • Attach a suction cup near the upper left corner of the glass display panel.

  • Pull up on the suction cup and use the flat end of a spudger to carefully pry the glass display panel out of the display assembly.

  • Once the upper left corner has been separated from the display, it may be helpful to use a guitar pick or another thin plastic object to keep the glass from sticking back down to the display assembly.

ヒートガンを使って、ガラスディスプレイパネルの上部左端附近の黒いストリップに留められた接着剤を柔らかくします。

ガラスディスプレイパネルの上部左端付近に吸盤カップを取り付けます。

吸盤カップを引き上げて、ディスプレイアセンブリとガラスディスプレイパネルの間に出来た隙間に差し込み、こじ開けます。

上部左側の端がディスプレイから外れたら、再装着を防ぐため、ギターのピックもしくは薄いプラスチックカードを差し込んでおくと便利です。

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.