Ir para o conteúdo principal
Inglês
Francês
Passo 5
If the printer is plugged in while the printhead is removed, the calibration data may be erased. Verify the printer is unplugged FIRST! When the printer is unplugged, lift the lever up and remove the printhead. Remove the printhead as shown. IMPORTANT: Leave the scanner lid open to indicate there is no printhead.
Remove the printhead (See calibration warning)
  • If the printer is plugged in while the printhead is removed, the calibration data may be erased. Verify the printer is unplugged FIRST!

  • When the printer is unplugged, lift the lever up and remove the printhead.

  • Remove the printhead as shown. IMPORTANT: Leave the scanner lid open to indicate there is no printhead.

Insira tradução aqui

Insira tradução aqui

Insira tradução aqui

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.