Ir para o conteúdo principal
Inglês
Japonês
Passo 7
Only use alcohol as a final option. It may damage the printhead seals! IF USED, FLUSH WITH CLEAN WATER 3 TIMES. Recommended circulation times: Alcohol: 5-10 minutes. Without alcohol: 15 minutes.
Clean the printhead
  • Only use alcohol as a final option. It may damage the printhead seals! IF USED, FLUSH WITH CLEAN WATER 3 TIMES.

  • Recommended circulation times: Alcohol: 5-10 minutes. Without alcohol: 15 minutes.

  • The water will get lighter as the ink breaks down. An ultrasonic cleaner may help with stubborn clogging.

  • Put the printhead in hot water. Let it sit until it is reasonably clean. Change the water as it turns black.

  • Wipe down the printhead contacts and nozzles by hand to ensure these areas are dry.

  • Before reinstalling the printhead, let it air dry for ~3-4 hours. Using a fan may speed this step up.

Insira tradução aqui

Insira tradução aqui

Insira tradução aqui

Insira tradução aqui

Insira tradução aqui

Insira tradução aqui

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.