Ir para o conteúdo principal

Aviso: Você está editando um guia tipo pré-requisito. Quaisquer alterações que você faça afetarão todos os 3 guias que incluem este passo.

Inglês
Alemão

Traduzindo o passo 2

Passo 2
Use the edge of an iPod opening tool to carefully pry the ambient light sensor board off the adhesive securing it to the display frame. Once you've gained enough clearance, peel the ambient light sensor off the LCD. If necessary, attach the plastic view window to your new ambient light sensor before installation.
  • Use the edge of an iPod opening tool to carefully pry the ambient light sensor board off the adhesive securing it to the display frame.

  • Once you've gained enough clearance, peel the ambient light sensor off the LCD.

  • If necessary, attach the plastic view window to your new ambient light sensor before installation.

Verwende die Kante des iPod-Öffnungswerkzeugs, um die Platine des Umgebungslichtsensors vorsichtig vom Kleber zu lösen, mit dem sie am Displayrahmen befestigt ist.

Wenn du ihn ausreichend gelöst hast, ziehe den Umgebungslichtsensor vorsichtig vom LCD ab.

Falls nötig, befestige die durchsichtige Plastikabdeckung an deinem neuen Umgebungslichtsensor, bevor du ihn einbaust.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.