Skip to main content

Aviso: Você está editando um guia tipo pré-requisito. Quaisquer alterações que você faça afetarão todos os 3 guias que incluem este passo.

Inglês
Japonês

Traduzindo o passo 1

Step 1
Use a heat gun to soften the adhesive underneath the camera/microphone cover. Pry the camera/microphone cover off the case with a metal spudger and remove it. It is extremely difficult, if not impossible, to avoid damaging the iPod case near the camera. While this will not affect the iPod's functionality, it will hurt its cosmetic appearance.
  • Use a heat gun to soften the adhesive underneath the camera/microphone cover.

  • Pry the camera/microphone cover off the case with a metal spudger and remove it.

  • It is extremely difficult, if not impossible, to avoid damaging the iPod case near the camera. While this will not affect the iPod's functionality, it will hurt its cosmetic appearance.

ヒートガンを使って、カメラ/マイクカバーの下に留められた接着剤を柔らかくします。

メタル製スパッジャーを使って、ケースからカメラ/マイクカバーをこじ開けて、取り外します。

カメラ付近のiPodケースにダメージを与えないようにすることは、不可能ではなくとも、極めて難しいです。この作業は、iPodの機能には影響しませんが、外観は損なわれます。

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.