Ir para o conteúdo principal

Aviso: Você está editando um guia tipo pré-requisito. Quaisquer alterações que você faça afetarão todos os 8 guias que incluem este passo.

Inglês
Alemão
Passo 3
Use the flat end of a spudger or a fingernail to carefully pop the two digitizer cable connectors straight up from their sockets. To avoid damaging your iPad, pry only on the connectors themselves, not on the socket on the logic board. To avoid damaging your iPad, pry only on the connectors themselves, not on the socket on the logic board.
  • Use the flat end of a spudger or a fingernail to carefully pop the two digitizer cable connectors straight up from their sockets.

  • To avoid damaging your iPad, pry only on the connectors themselves, not on the socket on the logic board.

Verwende das flache Ende eines Spudgers oder eines Fingernagels, um die beiden Digitizerkabelstecker gerade aus ihren Sockeln zu lösen.

Um dein iPad nicht zu beschädigen, heble nur an den Anschlüsse selbst und nicht an den Sockeln auf der Hauptplatine .

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.