Ir para o conteúdo principal

Aviso: Você está editando um guia tipo pré-requisito. Quaisquer alterações que você faça afetarão todos os 12 guias que incluem este passo.

Inglês
Japonês

Traduzindo o passo 3

Passo 3
Lift the display up from the frame and remove it from the iMac. It may be necessary to slowly lift from one side, to peel against the remaining adhesive. Be very careful handling the display—it's big, heavy, and made of glass.
  • Lift the display up from the frame and remove it from the iMac.

  • It may be necessary to slowly lift from one side, to peel against the remaining adhesive.

  • Be very careful handling the display—it's big, heavy, and made of glass.

  • If you're replacing the display with a new one, you may need to transfer some components from the old display to the new display.

  • During reassembly, head over to our display adhesive guide to install the new adhesive.

ディスプレイをフレームから持ち上げて、iMacから外します。

片側をゆっくりと持ち上げて、接着剤を剥がしながら外してください。

ディスプレイの取り扱いには特にご注意ください。ーディスプレイは大型で重量があり、ガラス製です。

ディスプレイを交換用ディスプレイに交換する場合、古いものから新しいパーツへコンポーネントを移植する必要があります。

再組み立ての際は、新しい接着剤をインストールするためにディスプレイ用の接着剤ガイドを参照してください。

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.