Ir para o conteúdo principal
Inglês
Japonês
Passo 5
Undo the 2 Phillips screws circled in red and detach the battery connector (so we don't short anything out)
  • Undo the 2 Phillips screws circled in red and detach the battery connector (so we don't short anything out)

  • Undo the 3 screws holding down the bottom of the logic board and charger port circled in green

  • Undo the flex cables and speaker power cable circled in blue and lift the charger port out

  • The flex cable for this board and the one next to it for the screen their locking tabs open from the back

  • Gently using a plastic opening tool lift out the bottom speaker

  • Also the rubber spacer circled in blue

  • Undo the flex cables circled in orange and slowly start pulling the old screen out

Insira tradução aqui

Insira tradução aqui

Insira tradução aqui

Insira tradução aqui

Insira tradução aqui

Insira tradução aqui

Insira tradução aqui

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.