Ir para o conteúdo principal

Aviso: Você está editando um guia tipo pré-requisito. Quaisquer alterações que você faça afetarão todos os 5 guias que incluem este passo.

Inglês
Francês
Passo 2
Throughout the following procedure, you'll be sliding thin plastic cards between the battery and rear case of the iPad, to separate the adhesive securing the battery. Be careful to keep the cards as flat as possible to avoid bending the battery, which may damage it and cause it to release dangerous chemicals. Insert a plastic card under the lower battery cell, at the lower right-hand corner. If you encounter significant resistance, re-heat the iOpener and repeat the previous step to give the adhesive more time to soften.
  • Throughout the following procedure, you'll be sliding thin plastic cards between the battery and rear case of the iPad, to separate the adhesive securing the battery. Be careful to keep the cards as flat as possible to avoid bending the battery, which may damage it and cause it to release dangerous chemicals.

  • Insert a plastic card under the lower battery cell, at the lower right-hand corner.

  • If you encounter significant resistance, re-heat the iOpener and repeat the previous step to give the adhesive more time to soften.

Tout au long de la procédure suivante, vous ferez glisser des cartes plastiques fines entre la batterie et la coque arrière de l'iPad, pour séparer l'adhésif de la batterie. Veillez à garder les cartes aussi plates que possible pour éviter de plier la batterie, ce qui pourrait l'endommager et libérer des produits chimiques dangereux.

Insérez une carte en plastique sous la batterie inférieure, dans le coin en bas à droite.

Si vous rencontrez de la résistance, réchauffez l'iOpener et répétez l'étape précédente pour donner à l'adhésif plus de temps pour ramollir.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.