Ir para o conteúdo principal

Aviso: Você está editando um guia tipo pré-requisito. Quaisquer alterações que você faça afetarão todos os 7 guias que incluem este passo.

Inglês
Francês

Traduzindo o passo 3

Passo 3
Remove last two 4.2 mm screws from the remaining back piece with a T5 Torx screwdriver. Once both screws are taken out, lift the rest of the backing out of the way. Once both screws are taken out, lift the rest of the backing out of the way.
  • Remove last two 4.2 mm screws from the remaining back piece with a T5 Torx screwdriver.

  • Once both screws are taken out, lift the rest of the backing out of the way.

Retirez les deux dernières vis de 4,2 mm de la pièce arrière restante avec un tournevis T-5 Torx.

Une fois les deux vis retirées, soulevez le reste du support.

-[* red] Remove last two 4.2mm screws from the remaining back piece with a T-5 Torx screwdriver.
+[* red] Remove last two 4.2 mm screws from the remaining back piece with a T5 Torx screwdriver.
[* black] Once both screws are taken out, lift the rest of the backing out of the way.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.