Ir para o conteúdo principal

Aviso: Você está editando um guia tipo pré-requisito. Quaisquer alterações que você faça afetarão todos os 8 guias que incluem este passo.

Inglês
Chinês
Passo 27
The Lightning connector cable is stuck to the case with some adhesive. To detach the adhesive you will be sliding an opening pick between the cable and the case. Be very careful not to cut the Lightning connector cable itself. Insert an opening pick under the Lightning cable where it meets the logic board. Slide the pick down and around the bend in the cable.
  • The Lightning connector cable is stuck to the case with some adhesive. To detach the adhesive you will be sliding an opening pick between the cable and the case. Be very careful not to cut the Lightning connector cable itself.

  • Insert an opening pick under the Lightning cable where it meets the logic board.

  • Slide the pick down and around the bend in the cable.

Lightning 接口电线用粘合剂粘在外壳上。要分离粘合剂,你将滑动电线和外壳之间的开口。小心不要切断 Lightening 电线本身。

在 Lightning 电线下面与逻辑板相连处插入一个撬片。

将撬片向下滑动并绕过电线的弯曲处。

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.