Ir para o conteúdo principal

Aviso: Você está editando um guia tipo pré-requisito. Quaisquer alterações que você faça afetarão todos os 8 guias que incluem este passo.

Inglês
Japonês
Passo 27
The Lightning connector cable is stuck to the case with some adhesive. To detach the adhesive you will be sliding an opening pick between the cable and the case. Be very careful not to cut the Lightning connector cable itself. Insert an opening pick under the Lightning cable where it meets the logic board. Slide the pick down and around the bend in the cable.
  • The Lightning connector cable is stuck to the case with some adhesive. To detach the adhesive you will be sliding an opening pick between the cable and the case. Be very careful not to cut the Lightning connector cable itself.

  • Insert an opening pick under the Lightning cable where it meets the logic board.

  • Slide the pick down and around the bend in the cable.

Lightningコネクターケーブルは背面ケースに接着剤によって留められています。この接着剤を剥がすには、ケーブルとケースの間に開封ピックをスライドさせます。Lightningコネクターケーブル自体を切断しないようにご注意ください。

ロジックボードと重なるLightningケーブル部分の下に開封ピックを差し込みます。

ケーブルのベンド周辺とその下部をピックでスライドさせます。

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.