Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Aviso: Você está editando um guia tipo pré-requisito. Quaisquer alterações que você faça afetarão todos os 28 guias que incluem este passo.

Inglês
Chinês
Passo 4
Remove the single 2.3 mm Phillips screw securing the battery connector to the logic board. To reduce the risk of a short, you can insert a battery blocker or a modified opening pick to disconnect the battery. Be very careful when you isolate the battery using a battery blocker. The battery contacts are easily damaged, resulting in irreversible damage.
  • Remove the single 2.3 mm Phillips screw securing the battery connector to the logic board.

  • To reduce the risk of a short, you can insert a battery blocker or a modified opening pick to disconnect the battery.

  • Be very careful when you isolate the battery using a battery blocker. The battery contacts are easily damaged, resulting in irreversible damage.

  • Slide the battery blocker underneath the battery connector area of the logic board, and leave it in place while you work.

取下固定电池排线到逻辑板的2.3 mm Phillips #000 螺丝

为了降低短路的风险,您可以使用电池隔离撬片来断开电池与逻辑板的连接。

将电池隔离撬片插入电池连接部位的下方,并将其放在此位置。

[* red] Remove the single 2.3 mm Phillips #000 screw securing the battery connector to the logic board.
[* icon_note] To reduce the risk of a short, you can useinsert a battery isolation[product|IF145-304-2|battery blocker|new_window=true] or a modified opening pick to disconnect the battery.
[* icon_caution] Be very careful when you isolate the battery using a battery blocker. The battery contacts are easily damaged, resulting in irreversible damage.

[* black] Slide athe battery isolation pickblocker underneath the battery connector area of the logic board, and leave it in place while you work.
[* red] Remove the single 2.3 mm Phillips #000 screw securing the battery connector to the logic board.
[* icon_note] To reduce the risk of a short, you can useinsert a battery isolation[product|IF145-304-2|battery blocker|new_window=true] or a modified opening pick to disconnect the battery.
[* icon_caution] Be very careful when you isolate the battery using a battery blocker. The battery contacts are easily damaged, resulting in irreversible damage.

[* black] Slide athe battery isolation pickblocker underneath the battery connector area of the logic board, and leave it in place while you work.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.