Ir para o conteúdo principal
Inglês
Japonês
Passo 6
Remove the foam padding pieces from the fan. Use a hairdryer or heat gun to soften the adhesive if necessary. Install these on the new fan in the same locations, using the adhesive left behind on the old fan as a reference.
  • Remove the foam padding pieces from the fan.

  • Use a hairdryer or heat gun to soften the adhesive if necessary.

  • Install these on the new fan in the same locations, using the adhesive left behind on the old fan as a reference.

ファンからフォームパッドを剥がします。

必要に応じてヘアドライヤー、ヒートガンを使用して、パッドの接着剤を柔らかくします。

交換用のファンの同じ位置にパッドを取り付けます。ガイドでは古いパッドに残っていた接着剤を使って装着しています。

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.