Ir para o conteúdo principal
Inglês
Alemão
Passo 6
Remove the foam padding pieces from the fan. Use a hairdryer or heat gun to soften the adhesive if necessary. Install these on the new fan in the same locations, using the adhesive left behind on the old fan as a reference.
  • Remove the foam padding pieces from the fan.

  • Use a hairdryer or heat gun to soften the adhesive if necessary.

  • Install these on the new fan in the same locations, using the adhesive left behind on the old fan as a reference.

Ziehe die Schaumstoffstücke vom Lüfter ab.

Benutze, wenn nötig, einen Haartrockner oder ein Heißluftgebläse, um den Kleber aufzuweichen.

Bringe die Stücke an den gleichen Stellen am neuen Lüfter an, die Kleberreste am alten Lüfter zeigen dir die genauen Stellen an.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.