Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Aviso: Você está editando um guia tipo pré-requisito. Quaisquer alterações que você faça afetarão todos os 17 guias que incluem este passo.

Inglês
Japonês
Passo 6
Make sure the suction cup is firmly attached to the front panel assembly. While holding the iPhone down with one hand, pull up on the suction cup to slightly separate the front panel assembly from the rear case.
Start lifting the front panel assembly
  • Make sure the suction cup is firmly attached to the front panel assembly.

  • While holding the iPhone down with one hand, pull up on the suction cup to slightly separate the front panel assembly from the rear case.

  • Take your time and apply firm, constant force. The display assembly is a much tighter fit than most devices.

  • With a plastic opening tool, begin to gently pry the rear case down, away from the display assembly, while you pull up with the suction cup.

  • There are several clips attaching the front panel assembly to the rear case, so you may need to use a combination of the suction cup and plastic opening tool to free the front panel assembly.

吸盤カップがフロントパネルアセンブリに密着していることを確認してください。

iPhone を片手でしっかりと抑えながら、吸盤カップを少しずつ引き上げて、本体背面ケースからフロントパネルのホームボタン端を引き離していきます。

時間をかけてゆっくりと同じ力加減で作業します。ディスプレイアセンブリは他のデバイスに比べて、特に頑丈に装着されています。

吸盤カップを上に持ち上げながら、プラスチック製の開口ツールで、ゆっくりと背面ケースの端からフロントパネルアセンブリを引き離します。

フロントパネルアセンブリを背面ケースに留めているクリップが幾つか付けられています。フロントパネルアセンブリを外すには、吸盤カップとプラスチック開封ツール両方を使う必要があります。

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.