Ir para o conteúdo principal
Inglês
Japonês
Passo 19
Take the jacket collar and open the folded section that you ripped out in step 6. Sandwich the top of the zipper and webbing in between the two layers as you would see it when it is finished.
  • Take the jacket collar and open the folded section that you ripped out in step 6.

  • Sandwich the top of the zipper and webbing in between the two layers as you would see it when it is finished.

  • Align the top of the webbing with the border between the fleece and the start of the same type of fabric as the webbing, about 1/4 inch below the edge of the collar.

ステップ6でほどいたジャケットの襟の折り返し部分を手に取ります。

仕上がった状態のようにジッパーとフラップの最上部を2層の生地の間にはさみます。

フリースとフラップと同生地の境界部分にフラップの最上部を揃えます。襟の縁の約6ミリ下の位置です。

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.