Pular para o conteúdo principal
Inglês
Espanhol
Passo 9
This step is for anti-glare display machines only. Skip this step if you have a glossy display. Disconnect the Bluetooth cable by pulling the male end straight away from its socket.
  • This step is for anti-glare display machines only. Skip this step if you have a glossy display.

  • Disconnect the Bluetooth cable by pulling the male end straight away from its socket.

  • Use the flat end of a spudger to carefully pry the AirPort antenna off its socket on the AirPort card.

  • Pull the connector parallel to the face of the logic board, not straight up.

Insira tradução aqui

Insira tradução aqui

Insira tradução aqui

Insira tradução aqui

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.